Skip to end of metadata
  • Created by Former user, last modified by Former user on Nov 01, 2010
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

To enable calling between 2 (or more) sipXecs PBX's there are four steps:

  1. Make sure each PBX can resolve pertinent DNS records for each other's domain.
  2. If the servers are behind NATs, make sure that you have enabled remote access as though you were setting up to allow remote workers. See Remote User NAT Traversal.
  3. Set up an unmanaged gateway on each PBX whose 'address' is the SIP domain name (not the fully qualified hostname) of the other PBX.
  4. Setup a dial plan to direct calls to the other PBX - use the 'site-to-site' dial plan type.
  • No labels