Skip to end of metadata
  • Created by Former user, last modified by Former user on Feb 10, 2011
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

How to configure Linksys SPA phones with sipX

The following instructions cover the configuration of Linksys's IP phones with sipXecs

Identify the phone's IP address

  • Connect the phone to a network with DHCP and power the phone up using the provided power supply.
  • Once the phone is up, press the "Configure" button (just below the Envelope button).
  • Use the up/down scroll buttons to scroll down to option '8 Network' and press the 'Select' softkey.

NOTE: Make a note of option "2 Current IP" (the current IP address)

Perform a Factory Reset

  • If the phone has been used with other systems you may want to factory reset the phone.
  • With the phone powered up, press the "Configure" button (just below the Envelope button).
  • Use the up/down scroll buttons to scroll down to option '14 Factory Reset' and press the 'Select' softkey.
  • Press the "Ok" softkey to confirm.

Connect to the phone's Web User Interface

  • Open a Web browser from your PC and enter the IP address of the phone in the Web browser's address field.
  • Click Admin Login on the Linksys configuration Web page (there is no default password).

Set the phone to Auto Provision

  • In the Web Interface click on Admin Login -> Advanced -> Provisioning Tab
  • Change the Profile Rule to read: /spa$MA.cfg

Known Issues

Call Pickup from Park Orbit

*Phones can retrieve from park orbit by dialing *4EXT where EXT is the Park Orbit Extension the call was transferred to.

sipXconfig Template Problem

Workarounds

MWI Setting

  • Go into the Admin -> Advanced -> EXT1 setting on each phone and setting Voice Mail Server to be ext@sip.domain.
  • No labels