The Device Menu
The main devices we are dealing with here are obviously phones.
In these menu options we have, however, also gateways – these are devices which connect a phone system to the outside world, or at least to a telephone company. Gateway configuration is covered in the advanced section of this manual.
...
After you added a single user manually, you would have to add a single phone.
Display the list of phones by selecting the Devices > Phones menu option, then click on
the arrow next to Add New Phone … to the right.
A list of phone models appears.
Select the model of your phone and you will end up on a screen for inputting serial number, description and groups:
After clicking Apply, the setting screen for the selected hone model will then appear and you can edit any settings required.
If the model of your phone does not appear on the list, this phone is not supported for automatic provisioning by sipXecs. In that case you do not need to enter any phone. Configure the phone directly on the device manually.
Automatic Phone Provisioning
Generating configuration information for a phone automatically and sending it to the phone is called provisioning. sipXecs can act as provisioning server for many phone models.
This means you can enter the settings of a phone on the sipXecs screens, and without having to walk over to the phones or logging on to their web interface, you can have all their settings configured automatically.
In most cases, provisioning requires a reboot of the phone – in other words you have to (1) generate the new configuration file in sipXecs, and (2) reboot the phone.
This disadvantage of that is of course that you cannot make configuration changes while the phone is in use. But you can schedule automatic reboots, so they can happen at midnight, when nobody is around.
Provisioning a Single Phone
Here is how you automatically send settings to a single phone.
• After having selected a phone and made any settings change, you go back to the main screen (entitled Identification).
• Click Send Profiles.
• Choose the schedule when the phone reboot is meant to occur. You could also disable the automatic reboot entirely (you’ll have to do it manually later then).
Provisioning Multiple Phones
You can provision any number of phones at the same time by selecting them from the list of phones and then clicking the button Send Profiles:
Alternatively, you can choose to provision all phones in the system by clicking the Send All Profiles button.
You can also restart selected phones using the same method.
Settings for Phones
Most IP phones have an innumerable amount of settings. We will not go into describing all of the settings of specific phone models here. Rather we show how this works for specific settings in sipXecs.
Click on any of the serial numbers or phone numbers on the phone list, and select one of the setting options to the left. Below the Basic Settings screen is shown.