Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • 3.2.2 Will not work with sipXecs SLA
  • 3.2.3 Any latency over approximately 30-40 ms will will cause the call to divert to voicemail after 1 or less rings.
  • Since version 3.2.0 LLDP and Supported TLVs is supported in the Polycom firmware. This will allow phones to get their vlan setting from your LLDP enabled network equipment if it is compatible, which allows you to deploy phones without physical admin interaction to configure the VLAN from the MENU on the phone at bootup.
  • 3.2.4 Seems to address most of the issues with 3.2.2 & 3.2.3
  • 3.2.5 has a "chirp" issue if you have messages waiting and stutter tone enabled.

Firmware 3.3.0 and 4.X is available but not fully tested yet. We expect there will be are some provisioning problems due to a change changes in config file format by Polycom.

Mfg

Model

Recommended
Firmwmare/Bootrom

Tested
sipXecs Verion

Known Issues

Polycom

Soundpoint IP 670

3.2.4b6/4.3.0 1

4.2.x and 4.4.0

1, 2, 3, 4

Polycom

Soundpoint IP 650

3.2.4b6/4.3.0 1

4.2.x and 4.4.0

1, 2, 3, 4

Polycom

Soundpoint IP 560

3.2.4b6/4.3.0 1

4.2.x and 4.4.0

1, 2, 3, 4

Polycom

Soundpoint IP 550

3.2.4b6/4.3.0 1

4.2.x and 4.4.0

1, 2, 3, 4

Polycom

Soundpoint IP 450

3.2.4b6/4.3.0 1

4.2.x and 4.4.0

1, 2, 3, 4

Polycom

Soundpoint IP 335

3.2.4b6/4.3.0 1

4.2.x and 4.4.0

1, 2, 3, 4

Polycom

Soundpoint IP 331/321

3.2.4b6/4.3.0 1

4.2.x and 4.4.0

1, 2, 3, 4

Polycom

Soundstation IP 5000, 6000, 7000, vvx1500

3.2.4b6/4.3.0 1

4.2.x and 4.4.0

1, 2, 3, 4

Polycom

VVX™ 1500, VVX 1500 C, and VVX 1500 D

 

4.2.x and 4.4.0

 

 

 

 

 

 

...