<?xml version="1.0" encoding="utf-8"?>
<html>
Adding support for managed gateways
Introduction
sipXconfig is an extensible management system for complete Enterprise communications solutions based on SIP. It is capable of managing both the server side infrastructure as well as all the required devices, such as phones and gateways and additional applications.
If you want to add support for new type of phones or FXS gateways you should check section on Adding support for managed phones Managed Phones Plugin. This page describes the steps required to add support for FXO gateways.
...
After those 3 steps are completed, sipXconfig users will be able to select new gateway type, configure the gateway using sipXconfig provided UI and generate gateway configuration files.
Registering a new gateway type
Gateway class
To add support for a newly released gateway from Acme Corp. we start by defining a class the gateway model class. Instances of this class will represent physical gateways known to sipXconfig. A newly added class has to extend the existing org.sipfoundry.sipxconfig.gateway.Gateway class.
{{Box File|sipXconfig/neoconf/src/org/sipfoundry/sipxconfig/gateway/acme/AcmeGateway.java|
| Panel |
|---|
| No Format |
| Code Block |
package org.sipfoundry.sipxconfig.gateway.acme public class AcmeGateway extends Gateway |
...
| Panel |
|---|
private PhoneDefaults { private PhoneDefaults m_defaults; |
...
protected void defaultSettings() {{panel} |
...
super.defaultSettings(); |
...
// TODO: add code that sets common settings for all gateways |
...
| Panel |
|---|
public void } public void generateProfiles(){ { // TODO: add code that generates configuration files |
...
| Panel |
|---|
public void } public void removeProfiles(){ { // TODO: add code that cleans generated configuration files |
...
| Panel |
|---|
public void } public void setDefaults(PhoneDefaults defaults){ { m_defaults = defaults; |
...
| No Format |
|---|
{panel} }} Couple of comments: * m_defaults will be magically injected in your gateway class - this is the instance of the PhoneDefaults class and despite its name it contains whole bunch of quite itneresting data about the system - you can get access to SIP Proxy address, TFTP server directory etc. * generateProfiles and removeProfiles are called by sipXconfig when system needs to generate (or respectively clean) configuration for this gateway - the usual implementation of generateProfiles will use some kind of templating system (for example Velocity) to inject Gateway settings into configuration file template, removeProfiles should clean all the files generated by generateProfiles * defaultSettings is a function that is called always before the instance of the gateway object is used - it's a change to set the default values for some common settings that cannot be hardcoded since they depend on specific installation - usually all settings the require IP address name of the SIP proxy or SIP domain name get their default value here h2. Registering gateway class To register gateway class we need also to define gateway model and settings model. SettingModel (see smAcme) is needed in order to locate and load [.xml setting file|sipX ConfigServer settings.xml] that describes parameters for the gateways. The path is relative to sipXconfig/neoconf/etc directory in the source tree. Setting files are installed \{prefix\}/etc/sipxpbx. Gateway class definition (see gwAcme below) needs to set "settingModel" property to model bean id. Gateway model (see gmAcme definition below) is used by sipXconfig when the list of all available models is displayed. It has 3 paramters specifying respectively gateway class, gateway internal model number, and user readable label. {{Box File|neoconf/src/org/sipfoundry/sipxconfig/gateway/gateway.beans.xml| {panel} } } |
Couple of comments:
- m_defaults will be magically injected in your gateway class - this is the instance of the PhoneDefaults class and despite its name it contains whole bunch of quite itneresting data about the system - you can get access to SIP Proxy address, TFTP server directory etc.
- generateProfiles and removeProfiles are called by sipXconfig when system needs to generate (or respectively clean) configuration for this gateway - the usual implementation of generateProfiles will use some kind of templating system (for example Velocity) to inject Gateway settings into configuration file template, removeProfiles should clean all the files generated by generateProfiles
- defaultSettings is a function that is called always before the instance of the gateway object is used - it's a change to set the default values for some common settings that cannot be hardcoded since they depend on specific installation - usually all settings the require IP address name of the SIP proxy or SIP domain name get their default value here
Registering gateway class
To register gateway class we need also to define gateway model and settings model.
SettingModel (see smAcme) is needed in order to locate and load .xml setting file that describes parameters for the gateways. The path is relative to sipXconfig/neoconf/etc directory in the source tree. Setting files are installed {prefix}/etc/sipxpbx.
Gateway class definition (see gwAcme below) needs to set "settingModel" property to model bean id.
Gateway model (see gmAcme definition below) is used by sipXconfig when the list of all available models is displayed. It has 3 paramters specifying respectively gateway class, gateway internal model number, and user readable label.
| Panel |
|---|
<bean id="smAcme" class="org.sipfoundry.sipxconfig.setting.SettingModel"> |
...
<bean id="gwAcme" class="org.sipfoundry.sipxconfig.gateway.acme.AcmeGateway" singleton="false" |
...
<bean id="gmAcme" class="org.sipfoundry.sipxconfig.phone.PhoneModel"> |
| No Format |
|---|
You
...
also
...
have
...
to
...
register
...
gateway
...
model
...
in
...
the
...
list
...
of
...
available
...
gateway
...
models
| Panel |
|---|
<bean id="gatewayContextImpl" class="org.sipfoundry.sipxconfig.gateway.GatewayContextImpl"> |
| No Format |
Now
...
it
...
is
...
a
...
good
...
time
...
to
...
check
...
if
...
the
...
code
...
is
...
working:
...
Run
...
all
...
the
...
tests
...
in
...
the
...
neoconf
...
module
...
as
...
follows
...
(
...
...
...
...
...
...
...
...
...
...
...
):
...
| Panel |
|---|
ant default style test-all {panel} Some of the tests will fail since the setting file is missing. h1. Defining the gateway model Of course just letting users select a new gateway is not very exciting. We would also like to configure some settings of this gateway with the sipXconfig UI. The nice thing is that we do not actually have to write any GUI code or learn HTML to accomplish this. All we need to do is to define all the parameters of the new gateway that we want to configure through the sipXconfig UI in the gateway model XML file. The format used for the model file to define gateway properties is exactly the same as the format used to define phone properties when adding support for a new phone. Let's start with just a couple of paramaters. Real gateways have closer to 300 parameters - I am just showing 3 parameters here in 2 groups "System" and "Voice Engine". {{Box File|neoconf/etc/acme/acme-gateway.xml| {panel} |
Some of the tests will fail since the setting file is missing.
Defining the gateway model
Of course just letting users select a new gateway is not very exciting. We would also like to configure some settings of this gateway with the sipXconfig UI. The nice thing is that we do not actually have to write any GUI code or learn HTML to accomplish this. All we need to do is to define all the parameters of the new gateway that we want to configure through the sipXconfig UI in the gateway model XML file. The format used for the model file to define gateway properties is exactly the same as the format used to define phone properties when adding support for a new phone.
Let's start with just a couple of paramaters. Real gateways have closer to 300 parameters - I am just showing 3 parameters here in 2 groups "System" and "Voice Engine".
| Panel |
|---|
<?xml version="1.0"?> |
| Panel |
<!DOCTYPE model |
...
|
...
|
| No Format |
|---|
}}
It's good to use an XML aware editor with DTD validation to do that, because sipXconfig provides formal DTD - settings.dtd file (on line and in neoconf/etc directory).
There is also a description of the settings format on the Settings File Format page.
...
Defining the settings allows sipXconfig not only to display them in the UI, but also persist them in the database, and back them up with all other managed configurations.
Implementing gateway profile generation
Profile generation is the most gateway specific part of the process. Whenever the user presses the Send Profiles button on the Gateways page, sipXconfig calls the generateProfiles function in the AcmeGateway class. Depending on the configuration protocol supported by the gateway, implementing generateProfiles can be really simple or may require substantial time.
...
Please post questions to the sipx-dev mailing list.</html>