General Phone Information
Cisco ManualNOTE:
| Note |
|---|
If you attempt to upgrade firmware AFTER entering phone into sipXconfig interface run this command |
| Code Blockpanel |
|---|
|
rm /var/sipxdata/configserver/phone/profile/tftproot/gk* |
then follow these instructions.
Setting up with sipXecs
Beyond adding an entry in the phone list for your Cisco phone and assigning a user to that phone, there are a few more steps you meed to make to this phone work.
...
- Power the phone up
- Press the Menu button
- Use the Navigation button to select Settings, and then press the Select softkey
- Use the Navigation button to select Network Configuration or SIP Configuration, and then press the Select softkey
- Make a note of a phone's MAC address for a later configuration of this device in sipXecs
- From the Network Configuration menu or the SIP Configuration menu, press **#
- If your phone displays 'Enter Admin Password', enter your password and then press the Enter softkey
- Set 'Alternate TFTP' to 'Yes'
- Select 'TFTP Server', press 'Edit'
- Set the IP address of TFTP Server to an IP Address of sipXecs, press 'Validate'
- Press 'Save'
- The phone restarts; the phone should get a new configuration from sipXecs's TFTP server
Changing the logo
To change the Cisco logo on your phone
...