...
| Panel |
|---|
- Begin by deleting all the default entries in "Intranet subnets" as they are almost always wrong.
- In "Intranet subnets", add as many entries as required to describe the local private network that sipXecs is a part of. For example, if your sipXecs is part of the private network 10.10.10.0/24 then you need to have a single "Intranet subnets" entry of "10.10.10.0/24".
- In "Intranet Domains", the default provided is almost always all you need - leave it as is.
- [xecsuserV4r2:Important] Make sure that 'Use external SBC for Internet Calling' check box is disabled. This setting may only be only useful when using a session border controller other than sipXbridge.
|
Step 4 - Restart the required services
NOTE: This step is only required if the sipXecs is deployed inside a private network. If you left the 'Server behind NAT' checkbox unchecked in Step 1 above then you can skip steps 2 through 5 completely and move on to Step 6 immediately.
...