Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

WIP330 Setup intructions for sipXecs

Assuming you can connect to a wireless AP or router on your LAN (without a NAT traversal to your sipX installation), start up the device's web interface. Realize also, this assumes you have the DNS SRV setup on your LAN and the sipx installation works properly already.

...

Once logged in, go to SIP > SIP SETTINGS

BEGIN CONFIG SCREEN

Panel

SIP Proxy Setup

SIP URL

(on the first line, just enter your extension number, when it is complete, the sip url for your phone should be:
"123"@yourdomain.com:5060, assuming the extension for this phone is 123, as you fill out the fields, it should update the SIP: field properly.

SIP : 123 "123"@yourdomain.com:5060

SIP Proxy: yourdomain.com
SIP Proxy Port: 5060
Registrar Address: yourdomain.com
Registrar Port: 5060
Expiry Time(sec.): 3600
Session Timer: 0
Display Name: "your display name"
SIP Format: X Normal O Drop Port XDrop 5060 Port (Normal should be shosen)

STUN Proxy Setup

STUN : X Disable O Enable (Disable should be chosen)
STUN Address:
STUN Port:

Outbound Proxy Setup

Outbound Proxy: sipx.yourdomain.com (your sipx FQHN)
Outbound Proxy Port: 5060

Authtication (this is not a typo by me, this is what Linksys displays)

Registrar Name: 123 (your extension)
Password: 123 (your sip password)

APPLY/SAVE and CLICK ON SDP SETTINGS

Payload: G.711u-G.711a-G.729
Packet Time: X Small O Large (Small should be chosen)
DTMF Relay: ENABLE
UDP Port: 5060
RTP Port: 2070

APPLY/SAVE

END CONFIG SCREEN

There is also a place in the phone to record the voice mail number for the system, which is "101" by default. Not sure what difference this makes, as the phone has no MWI capabilities whatsoever.

...