WIP330 Setup intructions for
...
sipXecs
Assuming you can connect to a wireless AP or router on your LAN (without a NAT traversal to your sipx sipX installation), start up the device's web interface. Realize also, this assumes you have the DNS SRV setup on your LAN and the sipx installation works properly already.
...
| Panel |
|---|
SIP Proxy Setup SIP URL (on the first line, just enter your extension number, when it is complete, the sip url for your phone should be: SIP : 123 "123"@yourdomain.com:5060 SIP Proxy: yourdomain.com STUN Proxy Setup STUN : X Disable O Enable (Disable should be chosen) Outbound Proxy Setup Outbound Proxy: sipx.yourdomain.com (your sipx FQHN) Authtication (this is not a typo by me, this is what Linksys displays) Registrar Name: 123 (your extension) APPLY/SAVE and CLICK ON SDP SETTINGS Payload: oldxx: G.711u-G.711a-G.729 APPLY/SAVE |
...
I have not fully tested transfer and other functions on it yet. The "key click" behavior can also be changed to silent. The way the phone handles DTMF makes it difficuly, becuase whether the key-click is silent or not, the receiver is not transmitting, so you usually lose the first work of whatever the AA or VM box is sending back to you. Also, realize the voice quality is fair if the battery is charged and the wireless signal is OK. I wouldn;'t use this for a home set or a desk set, but it is handy when you have to duck into wiring closets or go to a loud server room while on a factory support call. I got this one to show a customer who has 4 roaming staffers who do not need voicemail and have a robust wireless network, and it barely fits the bill.
On a lark, I also roamed to a remote location and was able to reach sipx sipX as there was a properly configured Ingate system with remote sip access already enabled and working. I just had to manually select the SSID from the wireless settings in the MENU. It also sseems seems to support TMobile hotspots, so you can pre-populate your username/password from them if you have an account and use it assuming you have a sip firewall capable of passing your remote user through like the Ingate InGate does. If it is all setup properly, your sip profile would not have to be edited in a "roaming" mode.