...
| Note |
|---|
This page needs updating. The information contained here relates to sipX release 2.6 or 2.8 and is therefore rather old. It is unknown how ACT phones behave with the current sipX release 3.6. If you have any information, please help us get this page updated. |
...
...
How To Configure Advantage Century Telecommunications (ACT) SIP Phones with
...
sipXecs
sipXsipXecs, The open source SIP PBX for Linux can work with all SIP compliant phones, gateways, and applications. As many system features depend on the capabilities of the end points, the selection of phones and gateways should be done by carefully taking into account specific requirements of the intended application and deployment.
...
Manufacturer Web Site: http://www.act-tel.com.tw/_pg/products/productItem.asp?productKey=39
- Protocol: SIP(RFC 3261)
- interface: 1 Ethernet (WAN) & 1 Ethernet (PC)
- LCD: 2 lines x 16 letters
- Codec: G.711A-Law/u-Law, G.729AB, G.723.1
- Voice Quality: VAD, CNG, AEC(G.168),
- Easy setting by Web browser
- Multi-user registration
- Multi-line
- Auto firmware upgrade (TFTP)
- 3-way conference
- Speed Dial
- Phone Book
- IP address: Static IP/PPPoE/DHCP
- NAT traversal: UPnP and STUN
- Handset/Speaker phone
- Out-of-band DTMF (RFC 2833)
- Voice Mail with message waiting indicator
- Call Forward (Busy, No answer, Unconditional)
- Call Transfer (Unattended, Blind, Attended)
- Call Park, Call Pick-up
- QoS: IEEE802.1p/q
- Anonymous call block, Caller ID
- Jitter buffer auto adjustment
...
sipXecs Configuration
The sipX configuration server currently does not support automatic provisioning of ACT SIP phones. However, they can be manually provisioned using the ACT phone's Web UI.
The configuration was tested with firmware revision 02.08.01
Create a new user in
...
sipXecs
To create a new user in sipX follow these steps:
...